GPSD认证竞赛自行车检测公司

EN 14781:2006:E Racing bicycles - Safety requirements and test methods 
竞赛车- 安全要求和测试方法

Clause

Test Requirement

4.2

Sharp edges 利边

4.3

Security and strength of safety-related fasteners 安全紧固件强度测试

4.4

Crack detection methods 裂缝探测方法

4.5

Protrusions 突出物

4.6

Brakes 刹车

4.7

Steering 操纵系统

4.7.1

Handlebar - Dimensions尺寸

4.7.2

Handlebar grip－areas, grips and plugs 车把手握把和插销

4.7.3

Handlebar stem -insertion-depth mark or positive stop车把手立管插入深度标记

4.7.4

Handlebar stem -extension to fork-stem-clamping requirements车把手立管延伸处装夹要求

4.7.5

Steering stability 操纵稳定性

4.7.6

Steering assembly-Static strength and security tests 静态强度及牢固性

4.7.7

Handlebar and stem assembly - Fatigue test 把手及立管疲勞

4.8

Frame 车架

4.8.1

Suspension frame - Special requirements 特殊要求

4.8.2

Impact test (Falling mass) 冲击测试(重物下落冲击）

4.8.3

Impact test (Falling frame) 冲击测试（车架下落冲击）

4.8.4

Frame-Fatigue test with pedalling forces 车架动态摇摆

4.8.5

Frame-Fatigue test with horizontal forces 水平力疲劳

4.9

Front fork 前叉

4.9.1

General 一般要求

4.9.2

Means of location of the axle 前叉轴之要求

4.9.3

Suspension fork - Special requirements 特殊要求

4.9.4

Front fork - Static bending test 静态弯曲测试

4.9.5

Front fork - Rearward impact test 向后冲击测试

4.9.6

Front fork - Bending fatigue test 弯曲疲劳测试

4.9.7

Forks intended for use with hub - or disc brakes 使用於花鼓或碟式煞車之前叉

4.10

Wheels and Wheel/tyre assembly轮子

4.10.1

Rotational accuracy 真圆度

4.10.2

Wheel/tyre assembly - Clearance 轮子间隙

4.10.3

Wheel/tyre assembly - Static strength test 轮子静态强度测试

4.10.4

Wheel retention 轮子保持力测试

4.10.5

Wheel - Quick-release devices 快卸机构

4.11

Rims , Tyres and tubes 轮缘, 轮胎

4.12

Pedals and pedal/crank drive system 踏板和曲柄

4.12.1

Foot retention踏板面

4.12.2

Pedal clearance 踏板间隙

4.12.3

Pedal/pedal spindle assembly - Static strength test 踏板/踏板轴组件 - 静态强度

4.12.4

Pedal spindle - Impact test 踏板轴冲击

4.12.5

Pedal/pedal spindle - Dynamic durability test 踏板/踏板轴组件 -动态疲劳测试

4.12.6

Drive system - Static strenght test 传动系统强度

4.12.7

Crank assembly - Fatigue test 曲柄组疲劳测试

4.13

Saddles and seat-pillars 座垫和座垫轴

4.13.1

General 一般要求

4.13.2

Limiting dimensions 尺寸

4.13.3

Seat pillar insertion mark 座垫轴插入深度记号

4.13.4

Saddle/seat pillar - Security test 座垫和座垫轴强度

4.13.5

Saddle - Static strength test 座垫轴静态强度

4.13.6

Saddle and seat-pillar clamp-Fatigue test座垫及座杆疲劳测试

4.13.7

Seat pillar - Fatigue test 座垫轴疲劳测试

4.14

Drive-chain 传动链条

4.15

Chainguard 链条盖

4.16

Spoke protector 辐条保护片

4.17

Lighting systems and reflectors照明系统及反射镜

4.18

Warning device报警装置

4.19

Handling and operation of fully-assembled bicycle 整车操纵性能测试

5

Instructions 说明书

6

Marking 标签

Informative item

Annex B

Steering geometry 掌舵部分几何图